Whew! Got this guy done. He is by far the biggest figure I have ever painted. He was a commission for our local Pressganger. It really is a freakin awesome model, but after painting one I don't think I could ever bring myself to do it again. :). (The red splotch in his tusk armor has since been corrected.)
Thursday, February 10, 2011
Thursday, February 3, 2011
Quick and easy razor wire.
I have been asked a few times about how I make my razor/barbed wire for my futuristic figure bases.
This is not the most realistic I have ever seen but it is certainly the easiest.
Floral wire is the only material you'll really need for this one.
For 28mm scale figs, I typically take 3 strands of the wire. 4 strands makes a pretty heavy duty cable look, and 2 strands could be used for Flames of war and similar scaled games. You'll want to put your strands together and bend one end of them together with some pliers, to give your drill chuck something substantial enough to hold on to.
Insert the bent ends into a power drill chuck and hold the other side with a pair of pliers and spin slowly until you get the desired braiding effect. Bad pic but I hope you get the idea.
Once it is all twisted up remove from the drill and cut off the ends that did not get twisted with some wire cutters. I put a dab of superglue on each end of the strands at this point to prevent them from fraying back apart.
Once the glue is dry, wrap your wire braid around something that will give you the correct scale. I used a paintbrush handle. For smaller scales, wrapping around a toothpick might be a good option.
Now just pull off your coil, snip sections off and apply paint as you need them.
Here's a few recent examples of stuff I've used it on.
This is not the most realistic I have ever seen but it is certainly the easiest.
Floral wire is the only material you'll really need for this one.
For 28mm scale figs, I typically take 3 strands of the wire. 4 strands makes a pretty heavy duty cable look, and 2 strands could be used for Flames of war and similar scaled games. You'll want to put your strands together and bend one end of them together with some pliers, to give your drill chuck something substantial enough to hold on to.
Insert the bent ends into a power drill chuck and hold the other side with a pair of pliers and spin slowly until you get the desired braiding effect. Bad pic but I hope you get the idea.
Once it is all twisted up remove from the drill and cut off the ends that did not get twisted with some wire cutters. I put a dab of superglue on each end of the strands at this point to prevent them from fraying back apart.
Once the glue is dry, wrap your wire braid around something that will give you the correct scale. I used a paintbrush handle. For smaller scales, wrapping around a toothpick might be a good option.
Now just pull off your coil, snip sections off and apply paint as you need them.
Here's a few recent examples of stuff I've used it on.
Wednesday, February 2, 2011
Quick and simple Trees
Just thought I'd do a little tutorial on how I make trees for my gaming boards. for the longest time I struggled to bulk out the foliage on my trees. I despise trying to glue Clump foliage to trees because it seems to never quite work out right, and I end up with a mess of hardened, throw away clumps. So here was my solution. This is really geared towards a casual terrain maker, not experts. ;)
So first off I grab a Woodland Scenics tree armature. I use these because I have them. I actually think that a nice looking, gnarly old twig would yield better and more realistic looking results, and would be cheaper if you don't already have these on hand.
Next is the stuff I use to make the bulk of the foliage. It is easily accessible from just about any DIY stores.
Now use the gap foam and spray it randomly on the tree armature. Don't go too crazy and put a bunch on as this stuff will get pretty heavy and fall off. Also, remember that it does expand pretty good as it dries. SO, put on less than you would think is necessary. Leave for an hour or two to dry.
Spray black or Dark green if you've got it. Just so any missed spots aren't glaring white underneath. Unlike other foams, this stuff will take spray paint just fine.
Cover liberally in white glue.
Now, you'll just want to dip it in a suitable mixture of flock. I use two different types of the fine flock from Woodland Scenics. A bag or two will be plenty enough to do dozens of trees.
At this point I realized my tree was a bit on the skimpy side, so I went ahead and added more foam to bulk it out more, and then just repeated all the previous steps.
At this point, you'll just need to base it to match your gaming tables. Spray with a varnish or hairspray and voila! You are done. With all of the drying time this tree took about 2.5 hrs. Next time I plan on assembly lining about a dozen to start making myself some decent sized forests.
So first off I grab a Woodland Scenics tree armature. I use these because I have them. I actually think that a nice looking, gnarly old twig would yield better and more realistic looking results, and would be cheaper if you don't already have these on hand.
Next is the stuff I use to make the bulk of the foliage. It is easily accessible from just about any DIY stores.
Now use the gap foam and spray it randomly on the tree armature. Don't go too crazy and put a bunch on as this stuff will get pretty heavy and fall off. Also, remember that it does expand pretty good as it dries. SO, put on less than you would think is necessary. Leave for an hour or two to dry.
Spray black or Dark green if you've got it. Just so any missed spots aren't glaring white underneath. Unlike other foams, this stuff will take spray paint just fine.
Cover liberally in white glue.
Now, you'll just want to dip it in a suitable mixture of flock. I use two different types of the fine flock from Woodland Scenics. A bag or two will be plenty enough to do dozens of trees.
At this point I realized my tree was a bit on the skimpy side, so I went ahead and added more foam to bulk it out more, and then just repeated all the previous steps.
At this point, you'll just need to base it to match your gaming tables. Spray with a varnish or hairspray and voila! You are done. With all of the drying time this tree took about 2.5 hrs. Next time I plan on assembly lining about a dozen to start making myself some decent sized forests.
Wednesday, January 26, 2011
On the bench
Well, I thought I'd show off some of the stuff that I have been working on. Mainly to show that I have not been totally idle, and to give a heads up on what to (hopefully) expect completed in the near future. Now, this doesn't always hold true for me, as occasionally something new and shiny will catch my eye, and I start and finish that before anything else gets a second look. I'm trying to hold off that temptation right now with the Black clad Wayfarer I got for Christmas. Anyway here is my recent progress.
And everything I am currently trying to finish.....or start:)
And everything I am currently trying to finish.....or start:)
Labels:
C3,
Hordes,
Miniatures,
On the bench,
Reaper,
Skorne,
Tir-na-bor
Sunday, January 16, 2011
Kaya the Wildborne.
Just finished this little chicky up a night or 2 ago. I'm really not very happy with her but, she was so hard to paint being absolutely tiny and all. So, I just had to let her be at some point. Anyway I decided to try and snap some pics with a backdrop of my Jungle terrain. Perhaps it will make them a little less boring than just the plain old black background.
Labels:
Circle,
Hordes,
Miniatures
Tuesday, January 11, 2011
The final Hydra
This is the last of my 3 Hydra warriors for my Mid-Nors. I'm sad to see them all done but I guess there are many, many more things to move onto. This guy actually had to be converted using a soldier of the plains shield arm. He was originally carrying a sword but I lost it when I moved last may. Ah well, I think I actually like this better, and it gave me a chance to try a freehand Mid-Nor symbol.
Labels:
C3,
Mid-Nor,
Miniatures
Tuesday, January 4, 2011
Neran joins the ranks.
Heres the first fig of many to be finished in 2011. This guy was not quite as enjoyable to paint as my other middies but still cool nonetheless. A buddy of mine gave me the idea for the striped pants, and I was really happy with how they came out!
Labels:
C3,
Mid-Nor,
Miniatures
Subscribe to:
Posts (Atom)

